Get a Frame Match

Guide · Sizing

Touch Screen Size Guide: Matching Frame to Display

Diagonal is only the start: outer frame dimensions, active area and aspect ratio decide whether an overlay actually fits your panel.

Diagonal is a nickname, not a dimension

Displays are sold by diagonal, but touch frames are built to millimetres. A "55-inch" television's cabinet might measure 1232 × 715 mm from one brand and 1245 × 722 mm from another, and an overlay built to the wrong one annunciates the error as a visible step at the bezel. This guide gives the measuring method that turns a nickname into an order, and the size ladder this catalogue actually builds.

Measure these four numbers

  1. Overall width and height of the display cabinet, front face, in millimetres.
  2. Active area — the picture itself, width × height (or the visible diagonal and aspect ratio).
  3. Bezel landing width — the flat border available around the picture for the frame profile to sit on.
  4. Depth and obstructions — front-face protrusions, logos, IR receivers, camera bumps.

With those four, a frame drawing is exact. With only the diagonal, it is a hope. The inquiry form asks for exactly these numbers.

The catalogue size ladder

15″–24″Counter terminals, machine fronts, compact kiosks — panel and kit territory
27″–43″The integrator sizes: 43″ LV-43 kit anchors this band
49″–65″Classrooms, meeting rooms, signage — 55″ and 65″ frames are the volume builds
70″–98″Feature walls and large teaching surfaces — catalogue frames to 98″
100″+Spliced and custom frames — see large format

Aspect ratio still matters

Legacy 4:3 displays persist in industrial and gaming estates; the catalogue keeps 4:3 panels (17″ and 19″) in the panel family for exactly that reason. When measuring a 4:3 set, state the ratio explicitly — a 19-inch 4:3 cabinet and a 19-inch 16:10 cabinet are different frames that share a nickname.

Viewing distance: the other sizing rule

For rooms, size follows the furthest viewer: roughly, a teaching or meeting display wants one inch of diagonal per 25–30 cm of room depth for content-heavy use. The meeting room page applies the rule room by room. Oversizing is a cost error; undersizing is a usability error that no calibration can fix.

Send your screen size — get a frame match

Tell us the diagonal — we match the frame, the PCBA and the glass stack to your display.

Start an Inquiry